Airbrush Compressor Kit Professional

Airbrush Compressor Kit Professional


o Piston type, oil free
o Starts with pressure, continuous working and powerful
o Safe and thermally protected
o It will turn off automatically if the power overheats
o Low noise, 47db
o Auto stop function
o Pressure-adjustable
o GS, CE, ETL, ROHS Approved

Compressor - Single Cylinder Piston Compressor
Power: 1/6 HP
Voltage: 220-240V/50HZ, 110-120V/60HZ, 220V/60HZ
Speed/MIN: 1450 (50HZ), 1700 (60HZ)
Air Output/MIN: 20-23L/MIN
Auto Stop: 57PSI (4BAR)
Auto Start: 43PSI (3BAR)
Fitting: Manometer, Pressure Regulator, Air filter
Connections: With connection G1/8''BSP (special fitting available)
Unit Dimensions: 25.5x13.5x20.5CM
Electric Cable: 1.8M
Net Weight: 3.6KGS
Air Gun - Series 61003
Nozzle Diameter: 0.3 - 0.5MM
Fluid Cup Capacity: 7cc



1. After taking the compressor out of its packaging, please check it carefully for any damages
due to shipping.
2. Install the compressor on a flat surface suitably sized in a dry room with good ventilation,
where the temperature is not likely to exceed 35?c.
3. Be sure the electrical line rating is proper to the appliance (refer to the data label), that the electrical line is protected and equipped of the ground line.
4. Dispose of the packaging material in compliance with the regulations in the country of origin or state where the compressor is installed.

1. Do not use the compressor for other purposes than the one it as been designed for.
2. Do not process other fluid than air.